Li-on charger for all brands.
The battery charger can be recharged in a variety of different types, such as IMR / Li-ion / LifePO4 3.7v, Ni-MH 1.2v, Ni-Cd 1.2V and supports a variety of sizes. A, AAA, AAAA, C, D, 10340,10350,16340 (RCR123), 10440,10500,12340,12500,1250,13450,13500,13650,14350,14430,14500,14650,16400,16650,17350,1750017650 , 17670,18350,18490,18500,18650,18700,20700,21700,22500,22650,25500,26500,26650 Almost all sizes
This new i4 charger uses an intelligent chip that can distinguish the type and size of the battery. And manage the correct and accurate voltage input to the battery using the microcomputer in total control. 4 independent chargers can charge different size at the same time. All charger compartments are protected against recharging, and the LED indicator shows charging status. And the battery warning light on the back. Fully charged and automatically cut off. The new Nitecore New i4 is faster than the original Nitecore i4 up to 100%, it can supply up to 1500mAh (i4 original 750mAh) and features IMR battery recovery and more. many Full features are very good, I recommend it.
Nitecore New i4 was upgraded from the original Nitecore i4 to 6 features.
1. New Nitecore New i4 rechargeable charger is 100% faster than the original i4, it can supply up to 1500mAh (when charging one).
New battery charger Nitecore New i4 comes with special features to distribute the charge immediately. If there are two batteries together. Then there is a lump full. The circuit will automatically add power to the rest of the battery, allowing it to charge more quickly.
New i4 will calculate the charging time of each battery. If the charger has been left unused for more than 20 hours, the charger will stop charging and the LED will light up. To prevent heat accumulation. Help prevent battery damage.
4. One of the cool features of the Nitecore New i4 charger is the function of recovering IMR batteries with a voltage of 0 Volt to re-use again. ** Press C and V simultaneously to restore the battery at 0 volt.
5. Nitecore New i4 can automatically select charging current based on battery capacity. And for batteries with high capacity, such as 18650 or 26650, if you hold down the C button for a moment. It is a fast charging system 1500mAh immediately. The charger is not charger type automatically. If the charger is not charging the charger. The system will alert the user by informing the LED is blinking 4 lamps.
6. Nitecore New i4 uses an intelligent microprocessor chip to identify the type and size of the battery. And automatically select the appropriate charging voltage for each battery pack. The system will stop charging immediately if the battery is recharged and the LED flashes to alert the user.
Voltage Input Voltage: AC 100-240V 50 / 60Hz 0.25A (max) 10W DC 9-12v 1A
Charge current output: 1.5Ax1 channel / 0.75Ax2 / 0.5Ax2 / 0.375A x4
Charger Number: There are 4 separate charging channels. Battery can be charged at the same time.